Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of jacketed ball valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade jacketed ball valve from our factory.
Product Introduction
Yuhong jacketed ball valves carry a heating or insulating jacket around the body, through which steam, heat transfer oil, or another heating medium can flow, reducing the risk of high-viscosity and solidifying media cooling and blocking inside the valve. They suit bitumen, resin, heavy oil, and high-viscosity chemical lines.
Product Overview
A jacketed ball valve is an industrial valve with a heating or insulating cavity around the ball valve body, mainly used in piping systems that must hold the media temperature, prevent solidification, or limit viscosity rise.
Bitumen, resin, heavy oil, some polymers, and other high-viscosity media can show a marked rise in viscosity, crystallisation, solidification, or deposition as temperature falls.
The body interior and cavity of an ordinary ball valve readily form relatively cold zones where media can deposit, affecting valve movement or causing blockage.
A jacketed ball valve sets a heat transfer cavity outside the body and passes steam, heat transfer oil, or another suitable heating medium through it, transferring heat to the body and the process flow path to help hold the media temperature.
To the site requirements, a partial jacket, a full jacket, or a construction combined with the pipe insulation system can be used.
Note that a jacket transfers heat and holds temperature; it does not automatically control temperature for every medium. The actual heat transfer capability depends on the heating medium temperature, flow, jacket construction, insulation conditions, and process flow.
Shandong Yuhong Valve Co., Ltd. supplies matching jacketed ball valve configurations to the media freezing point, viscosity change, working temperature, and heating medium conditions.
Core Advantages of the Jacketed Ball Valve
1. Reduces Media Solidification Inside the Valve
Continuous or intermittent heating through the jacket keeps the body at a suitable temperature, which helps reduce cooling and solidification of some high-viscosity media in the ball passage and cavity.
For chemicals prone to crystallising, the heating medium should be chosen against the crystallisation temperature and the process temperature.
2. Full or Partial Jacket Options
Different jacket coverage can be used depending on media viscosity and heat loss.
For temperature-sensitive high-viscosity media, cold spots at the body-to-pipe interfaces may need to be minimised.
Increasing jacket coverage also affects product outline, weight, and maintenance space, so it has to be balanced in the design.


3. Supports Different Heating Media
Common heating media include industrial steam, heat transfer oil, and applicable hot water.
When choosing a heating medium, make sure the jacket design pressure, temperature, and connection interfaces suit the actual conditions, so the heating medium pressure does not exceed the jacket limit.
4. Works with Automated Shut-Off Systems
Jacketed ball valves can be fitted with pneumatic or electric actuators for remote switching of high-viscosity media.
Actuator selection should account for the actual media viscosity, the cold-start state, and possible deposit loads - not just the torque calculated at normal hot conditions.
Technical Specifications
|
Parameter |
Available Configuration |
|
Product Construction |
Ball valve body with external heating or insulating jacket |
|
Nominal Size |
DN15–DN300 (NPS 1/2–12); special large sizes custom-built |
|
Main Valve Nominal Pressure |
PN10, 16, 25, 40, 63; special high-pressure versions designed separately |
|
ASME Pressure Class |
Class 150, 300, 600, configured to the main valve construction |
|
Jacket Design Pressure |
Commonly PN6, PN10, PN16, designed to the heating medium system |
|
Operating Temperature |
Commonly -20°C to +200°C; special metal-seated constructions extendable to +350°C and above |
|
Body Material |
WCB, WCC, CF8, CF8M, CF3M, applicable cast and forged materials |
|
Jacket Material |
Carbon steel, stainless steel, and applicable welding materials |
|
Ball Material |
304, 316, 316L, and applicable corrosion-resistant alloys |
|
Stem Material |
304, 316, 316L, 17-4PH, etc. |
|
Ball Construction |
Floating ball or applicable trunnion mounted |
|
Bore Type |
Full bore, reduced bore |
|
Jacket Type |
Full jacket, partial jacket, body heating jacket |
|
Heating Medium |
Steam, heat transfer oil, hot water, and other applicable heat transfer media |
|
Jacket Connection |
Threaded, flanged, welded nozzle, etc. |
|
Jacket Nozzle Size |
Commonly DN15–DN40, determined by heating medium flow and design |
|
Main Valve Sealing |
PTFE, RPTFE, PPL, PEEK, metal seating |
|
Sealing Face Hardening |
STL, WC, and applicable structures |
|
Stem Packing |
PTFE, flexible graphite, high-temperature packing |
|
Body Insulation |
Can be combined with external insulation and line tracing |
|
Main Valve Connection |
RF, RTJ, BW, etc. |
|
Connection Standard |
ASME B16.5, EN 1092-1, HG/T 20592 |
|
Face-to-Face Dimension |
Designed to the jacket construction and pipe connection |
|
Operation |
Lever, worm gear, pneumatic, electric |
|
Automation |
Remote switching, position feedback, interlock control |
|
Protection Rating |
IP65, IP66, IP67, per the actuator |
|
Optional Accessories |
Solenoid valve, limit switch, temperature measuring point, insulation connection |
|
Design Requirement |
Main valve and jacket designed to their respective pressure-containing codes |
|
Inspection Requirement |
Main valve pressure/sealing test, independent jacket pressure and leakage test |
Note: the main valve pressure class and the jacket pressure class are different and must be confirmed separately. The jacket pressure must not simply follow the main valve PN value.
Typical Applications
Bitumen and Heavy Oil:
Transfer lines that must be prevented from thickening or solidifying on cooling.
Resin and Polymers:
Shut-off of applicable resin liquids, polymers, and other temperature-sensitive media.
Fine Chemicals:
Some media that crystallise easily, solidify, or change viscosity markedly with temperature.
Special Chemical Transfer:
Jacket and body materials configured to the media temperature and heating medium conditions.
How Do You Select a Jacketed Ball Valve Correctly?
Establish the Freezing Point and Viscosity-Temperature Behaviour
Customers should provide the freezing point, normal temperature, minimum allowable temperature, and how the media viscosity changes with temperature.
If the medium solidifies quickly below a certain temperature, the jacket construction and heating medium system must meet the corresponding temperature-holding requirement.
Consider Heating Medium Pressure and Temperature
The heating medium may be steam or heat transfer oil, with different pressure, temperature, and flow conditions.
Jacket pressure design, nozzles, and welded structures all have to be determined by the heating medium conditions.
Watch Cavity Build-Up
Some high-viscosity media stagnate between the ball and the body.
For media prone to polymerising or solidifying, a cavity-filled construction, dedicated sealing, and appropriate cleaning measures can be evaluated to reduce build-up.
Yuhong Jacket Welding and Quality Control
Manufacturing a jacketed ball valve means controlling two systems at once: the main body and the external jacket.
The main valve check focuses on the ball, seat, stem, and shut-off sealing; the jacket check focuses on weld quality, heating medium flow path, and pressure-containing sealing.
At inspection, pressure tests are run separately on the main valve and the jacket - the main valve test result alone does not prove the jacket is sound.
For automated products, valve operating torque and actuator capability are also confirmed under appropriate working conditions.
FAQ
Q1: What is the difference between a jacketed ball valve and an ordinary ball valve with external insulation?
A jacketed ball valve actively transfers heat to the body through the heating medium in the jacket; ordinary external insulation mainly reduces heat loss. The two serve different purposes.
Q2: Can steam be passed through the jacket?
Yes, but the jacket has to be designed for the steam pressure and temperature, with condensate drainage and the corresponding connection method considered.
Q3: Can a jacketed ball valve handle media that crystallises easily?
It can be assessed against the crystallisation temperature, media properties, and operating conditions, but cavity build-up, shutdown cooling, and restart also need consideration.
Q4: Must a jacketed ball valve use a reduced bore?
Not necessarily. The bore depends on the media flow, ball construction, jacket coverage, and connection dimensions, so either a full bore or reduced bore scheme can be evaluated.

Request a Jacketed Ball Valve Quotation
Please provide the media name, freezing point or viscosity, normal temperature, minimum allowable temperature, main valve pressure class, heating medium type, jacket pressure, and operation method. Yuhong can then configure the ball valve, jacket, and actuator scheme to these conditions.
Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com
Hot Tags: jacketed ball valve, China jacketed ball valve manufacturers, suppliers, factory, bellows seal globe valve, cryogenic globe valve, DIN globe valve, handwheel globe valve, low noise globe valve, sanitary globe valve




