Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of forged steel ball valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade forged steel ball valve from our factory.
Product Introduction
Yuhong forged steel ball valves use A105, LF2, F316, and other forged alloys for the pressure-containing body, suiting high-pressure, low-temperature, and critical industrial lines. Floating ball, trunnion mounted, soft-seated, and metal-seated designs are available with flanged, threaded, socket weld, and butt weld connections.
Product Overview
A forged steel ball valve is an industrial ball valve whose body and other main pressure-containing parts are made from forged material, its defining feature being the structure and mechanical properties obtained through the forging process in line with the material standard.
Compared with a conventional cast body, a forged body differs in internal structure, defect control, and machining allowance, and is often used for high pressures, small bores, critical equipment interfaces, and industrial duties that call for specific low-temperature material performance.
Forged steel ball valves can use a floating ball or trunnion mounted construction, and can be built as one-piece, two-piece, three-piece, and fully welded bodies.
So "Forged Steel Ball Valve" mainly describes the body material and manufacturing process, not a sealing principle separate from floating and trunnion mounted designs.
To the customer's duty, A105 carbon steel, A350 LF2 low-temperature carbon steel, A182 F316 stainless steel, duplex, or other alloys can be selected.
Shandong Yuhong Valve Co., Ltd. supplies matching forged steel ball valve products and automation configurations to the pipeline class, temperature, pressure, and material requirements.
Main Advantages of Forged Steel Ball Valves
1. Pressure-Containing Construction Suited to Higher Pressures
Forged material gives a high-pressure ball valve a sound basis of strength and material consistency.
For high pressure classes such as Class 900, 1500, and 2500, forged bodies are often used in small-bore and specific high-pressure constructions.
The actual allowable pressure still depends on material, temperature, wall thickness, and body design.
2. Material Traceability and Inspection Options
Forged steel ball valves can be supplied with heat numbers, material certificates, chemical composition, and mechanical property records to the project requirements.
For critical purchases, PMI, hardness testing, non-destructive testing, and other material inspections can be arranged as required.


3. Suited to Different Temperatures and Corrosive Conditions
Selecting materials such as A350 LF2, A182 F316, F51, and F55 covers a range of low-temperature, corrosive, and high-strength applications.
Note that the material grade must comply with the limits of the corresponding temperature, media, and material standard - the word "forged" alone does not define the service range.
4. Multiple Connections for Piping Requirements
Small-bore forged steel ball valves can use NPT, SW, BW, or flanged connections.
For high-pressure piping, the connection type should be confirmed against the project piping class, with field welding and installation requirements considered.
Technical Specifications
|
Parameter |
Available Configuration |
|
Product Construction |
Forged pressure-containing body, 90° rotary ball valve |
|
Nominal Size |
DN8–DN600 (NPS 1/4–24); large-bore forged trunnion constructions configured separately |
|
Nominal Pressure |
PN16, 25, 40, 63, 100, 160, 250, 320, 400, 420 |
|
ASME Pressure Class |
Class 150, 300, 600, 800, 900, 1500, 2500, selected to the connection type |
|
Operating Temperature |
Standard -29°C to +200°C; special low-temperature and metal-seated high-temperature constructions selected separately |
|
Body Material |
ASTM A105, A105N, A350 LF2, LF3 |
|
Stainless Steel Materials |
ASTM A182 F304, F304L, F316, F316L, F321, F347 |
|
Alloy Steel Materials |
ASTM A182 F11, F22, and applicable alloys |
|
Duplex Materials |
F51, F53, F55, etc. |
|
Nickel Alloys |
Applicable grades of Inconel, Monel, Hastelloy, etc. |
|
Body Construction |
One-piece, two-piece, three-piece, forged trunnion construction |
|
Ball Construction |
Floating ball, trunnion mounted |
|
Ball Material |
F304, F316, F316L, A105+ENP, and applicable alloys |
|
Stem Material |
304, 316, 316L, 410, 17-4PH |
|
Soft Seat Materials |
PTFE, RPTFE, PEEK, Nylon, Devlon |
|
Metal Seating |
STL, WC, and applicable wear-resistant structures |
|
Sealing Direction |
Unidirectional, bidirectional, per the specific seat design |
|
Bore |
Full Bore, Reduced Bore |
|
Stem Anti-Blowout |
Optional |
|
Antistatic Construction |
Optional |
|
Fire-Safe Design |
Configurable to API 607, ISO 10497, and applicable standards |
|
Low-Emission Design |
Configurable to applicable ISO 15848-1 and API 641 requirements |
|
End Connection |
NPT, SW, BW, RF, RTJ |
|
Thread Standard |
ASME B1.20.1 |
|
Socket Weld Standard |
ASME B16.11 and applicable standards |
|
Butt Weld End Standard |
ASME B16.25 |
|
Flange Standard |
ASME B16.5, EN 1092-1 |
|
Operation |
Lever, worm gear, pneumatic, electric |
|
Actuator Interface |
ISO 5211 and applicable bracket design |
|
Material Inspection |
Material certificate, PMI, hardness, NDT, etc., per order requirements |
|
Sour Service Option |
Applicable ISO 15156/NACE MR0175 material requirements |
|
Design Standards |
API 608, ASME B16.34, ISO 17292; pipeline products may follow API 6D |
|
Inspection and Testing |
API 598, ISO 5208, API 6D, and applicable standards |
Note: Class 800 commonly belongs to a specific small-bore connection and pressure class system; do not treat it as a uniform class for all flanged forged steel ball valves. Large-bore forged steel ball valves normally use a dedicated trunnion construction.
Typical Applications
High-Pressure Petrochemical Lines:
Shut-off at process units, equipment inlets and outlets, and high-pressure branches.
Power and Steam Auxiliary Systems:
Forged steel ball valve constructions selected to the working temperature and seat material.
Natural Gas and Industrial Gases:
High-pressure gas transmission and station piping, with antistatic, sealing, and material requirements configured to the media.
Low-Temperature Industrial Lines:
Applicable low-temperature materials and dedicated sealing constructions for cryogenic media within their temperature limits.
How Do You Choose Between A105, LF2, and F316?
A105 is normally used for carbon steel industrial piping suited to its design temperature range.
LF2 carries the corresponding low-temperature material requirements and is often used in systems needing low-temperature impact performance.
F316 has good general corrosion resistance but does not suit every corrosive medium - chloride and other specific chemical environments need particular assessment.
Material selection should check the design temperature, media composition, pressure class, and the customer's material specification together.
Yuhong Forged Product Manufacturing Control
The manufacturing quality of a forged steel ball valve covers raw material traceability, pressure-containing wall thickness, body machining, ball-to-seat fit, and stem strength.
For high-pressure projects, the minimum body wall thickness and connection structure are checked against the standard, with the corresponding non-destructive testing where necessary.
After assembly, operating torque, stem sealing, seat sealing, and shell pressure performance are checked, so that each material and construction combination meets the order requirements.
FAQ
Q1: Is a forged steel ball valve always better than a cast steel one?
Not necessarily. Both processes have their applicable range. What matters is whether the material, body design, manufacturing quality, and service conditions match.
Q2: Is a forged steel ball valve always a floating ball design?
No. Small-bore products often use a floating ball, while large-bore and high-pressure products can use a forged trunnion construction.
Q3: Can an A105 forged steel ball valve be used directly in cryogenic service?
No. Cryogenic applications need materials that meet the minimum design temperature requirement, with the appropriate low-temperature performance verification.
Q4: Why does a high-pressure forged steel ball valve need extra attention on stem strength?
High pressure and sealing friction affect operating torque and stem loading. Strength, torque, and actuator matching should be calculated from the maximum working differential pressure and the seat construction.

Request a Forged Steel Ball Valve Quotation
Please provide the body material grade, pressure class, size, media, temperature, end connection, sealing requirements, and material inspection requirements. Yuhong can supply the matching forged body construction, trim, and automated actuator scheme.
Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com
Hot Tags: forged steel ball valve, China forged steel ball valve manufacturers, suppliers, factory, bellows seal forged globe valve, cast angle globe valve, food grade globe valve, Jacketed Control Valve, PN40 globe valve, turbine bypass globe valve





