Fully Welded Ball Valve

Yuhong fully welded ball valves use a welded body to remove the potential external leakage paths of conventional flanged bodies. Trunnion mounted, full bore, DBB, and buried extended stem designs are available for long-distance gas pipelines, city gas, and oil and gas stations.
Send Inquiry
Description

Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of fully welded ball valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade fully welded ball valve from our factory.

 

Product Introduction

 

Yuhong fully welded ball valves use a welded body to remove the potential external leakage paths of conventional flanged bodies. Trunnion mounted, full bore, DBB, and buried extended stem designs are available for long-distance gas pipelines, city gas, and oil and gas stations.

 

Product Overview

 

A fully welded ball valve is an industrial ball valve whose main pressure-containing body parts are joined by welding, commonly used in gas transmission, city gas, and other pipeline systems that demand long-term reliable isolation.

Unlike ordinary ball valves with bolted bodies and end caps, a fully welded body forms a single pressure-containing structure through an approved welding process, reducing the potential leakage paths at body joints and gaskets.

Large fully welded ball valves normally use a trunnion mounted construction, sealing through top and bottom ball supports and spring-loaded seats.

To the application, they can be configured with a full bore passage, welded or flanged ends, cavity pressure relief, DBB, and a buried extended stem.

For gas valves installed underground, external corrosion protection, waterproofing, stem extension, position indication, and operating and maintenance conditions all need consideration.

Shandong Yuhong Valve Co., Ltd. provides fully welded ball valve configurations to the pipeline design pressure, temperature, media, pipe size, and site installation requirements.

 

Main Advantages of the Fully Welded Ball Valve

 

1. Fewer Body Joint Leakage Paths

A welded, single pressure-containing structure reduces the gaskets and fasteners at split body connections.

That helps lower the external leakage risk at those interfaces and suits pipelines with long-term sealing reliability requirements.

Stem sealing, seats, and weld quality remain critical control points, though - fully welded does not mean the valve has no leakage risk at all.

2. Suited to Buried and Long-Distance Pipelines

Fully welded ball valves can be fitted with buried extended stems, corrosion protection, and above-ground operating devices.

For city gas and long-distance gas pipelines, the stem extension length, position feedback, and actuator configuration are set by the burial depth and operating requirements.

101672660991a0e10d961e486fba4643cc064754c0
1016238186121d63b4a19b47148caa91f2649618f42

 

3. Trunnion Construction and Bidirectional Isolation

Large fully welded ball valves normally use a trunnion mounted ball with floating seats.

SPE or DPE seats can be used as required, together with DBB and cavity bleed functions, to meet the relevant pipeline isolation requirements.

4. Full Bore Available for Pigging

For lines requiring pigging, the ball passage can be designed to the pipe ID and pig dimensions.

The actual effective bore should be stated in the product drawings and technical documents to ensure it matches the pigging system.

Technical Specifications

 

 

Parameter

Available Configuration

Product Construction

Fully welded body, mainly trunnion mounted

Nominal Size

DN50–DN1400 (NPS 2–56); special large projects by dedicated design

Nominal Pressure

PN16, 25, 40, 63, 100, 160, 250

ASME Pressure Class

Class 150, 300, 600, 900, 1500; special high-pressure constructions evaluable to Class 2500

Operating Temperature

Standard -29°C to +120°C; dedicated low-temperature and high-temperature constructions designed separately

Body Construction

Welded body from forged or formed components

Body Material

A105, A350 LF2, applicable pipeline steels, and other low-temperature materials

Special Materials

A182 F304, F316, and applicable corrosion-resistant alloys

Ball Material

A105+ENP, 304, 316, and applicable materials

Stem Material

410, 316, 17-4PH, and applicable high-strength alloys

Ball Support

Upper and lower trunnions with bearing support

Seat Construction

Spring-loaded SPE, DPE

Seat Material

PTFE, RPTFE, Nylon, Devlon, PEEK, etc.

Metal Seating Option

Metal seat with applicable wear-resistant coating

Bore Type

Full Bore, Reduced Bore

Cavity Function

DBB, optional DIB, cavity relief

Emergency Sealing

Seat and stem sealant injection ports

Stem Construction

Anti-blowout stem, antistatic construction

Fire-Safe Construction

Designable to API 607, API 6FA, and applicable requirements

Weld Inspection

VT, UT, RT, MT, PT selected to the weld and project requirements

Body Welding

Per approved WPS/PQR and applicable welding specifications

External Coating

Epoxy coating, 3LPE, and applicable pipeline coating systems

Buried Configuration

Extended stem, above-ground operating interface, protective sleeve

End Connection

BW, RF, RTJ, and applicable combination ends

Weld End Standard

ASME B16.25 and pipeline connection requirements

Face-to-Face Dimension

API 6D, ASME B16.10, and project standards

Operation

Worm gear, pneumatic, electric, hydraulic, gas-over-oil

Automation

Remote shut-off, ESD, position feedback

Sour Service Option

Material selection per ISO 15156/NACE MR0175

Design Standards

API 6D, ASME B16.34, and applicable pipeline standards

Testing Standards

API 6D, API 598, and project-specific tests

Note: the maximum pressure class, size, and buried configuration of a fully welded valve must be combined case by case. Post-weld pressure testing and field pipe welding requirements should each be stated separately.

 

Typical Applications

Long-Distance Gas Pipelines:

Mainline isolation, station sectional shut-off, transmission nodes, and pigging systems.

City Gas:

Isolation control at underground distribution networks and the inlet and outlet of regulating stations.

Oil Transmission:

Crude oil pipelines and transmission stations at applicable pressure classes.

District Energy Lines:

Applicable sealing and body constructions for some industrial energy networks, within their temperature and pressure limits.

 

What Should You Watch with Buried Fully Welded Ball Valves?

 

Buried projects should define the pipeline burial depth, above-ground operating height, groundwater conditions, external corrosion protection, and cathodic protection requirements.

Where pneumatic, electric, or gas-over-oil actuators are needed, also assess the site operating space, energy supply, position feedback, and fail-safe requirements.

For welded-end valves, field welding must take measures to keep welding heat from damaging the seat and stem seals. The installation must follow the manufacturer's welding procedure.

 

Yuhong Manufacturing and Weld Quality Control

 

The quality control focus of a fully welded ball valve covers pressure-containing part materials, ball support, seat sealing, welding process, and weld integrity.

Manufacturing follows the approved WPS/PQR, performs non-destructive testing per the project rules, and checks post-weld structural dimensions and valve movement.

Because the body cannot easily be opened after welding, trim cleanliness, seal assembly, and welding process control matter even more.

On completion, shell, seat, and the necessary functional tests are carried out per the applicable standards.

 

FAQ

 

Q1: Is a fully welded ball valve completely free of external leakage?

The welded construction reduces potential leakage paths at split body joints, but stem sealing, welds, and other pressure-containing areas still have to be sound.

Q2: Can the seat of a fully welded ball valve be replaced after burial?

An ordinary fully welded construction is not normally designed to be opened for trim replacement the way a bolted body is. Service life, maintainability, and emergency sealing provisions therefore need attention at the design and delivery stage.

Q3: Can a fully welded ball valve have both welded and flanged ends?

Welded ends, flanged ends, or a combination can be selected to the engineering design, but the welded pressure-containing body structure and the pipe connection type are two different concepts.

Q4: Why do gas pipelines often choose fully welded trunnion mounted ball valves?

Because the construction suits large bores, higher pressures, and long-term isolation requirements, reduces leakage risk at body joints, and readily accommodates buried extended stems and a full bore passage.

 

modular-1

Request a Fully Welded Ball Valve Quotation

Please provide the pipe size, pressure class, media, pipeline temperature, pigging requirements, burial depth, end connection, and drive and control requirements. Shandong Yuhong Valve Co., Ltd. can then configure the fully welded body, seat construction, coating system, and actuator.

Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com

Hot Tags: fully welded ball valve, China fully welded ball valve manufacturers, suppliers, factory, chilled water globe valve, manual globe valve, shutoff globe valve, soft seated globe valve, stainless steel globe valve, steam control globe valve

Send Inquiry