Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of top entry ball valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade top entry ball valve from our factory.
Product Introduction
Yuhong top entry ball valves have a removable top cover, so key trim can be inspected through the upper opening after the line is isolated and depressurised, cutting some pipe dismantling during maintenance. Trunnion mounted, soft-seated, and metal-seated designs are available for oil and gas, chemical, and high-pressure industrial lines.
Product Overview
A top entry ball valve is an industrial ball valve that installs or removes the ball, seat, and related internal parts through an opening in the top of the body.
Unlike the common side entry ball valve, a top entry body has a removable top cover. Once equipment isolation, full depressurisation, and safe maintenance conditions are met, some key trim can be inspected or replaced through the upper opening.
This construction suits industrial systems where frequent pipe dismantling is impractical, maintenance space is limited, or shutdown work should be reduced.
Top entry ball valves can use cast or forged bodies, usually combined with trunnion ball support and removable seat constructions. To the duty, they can be configured with soft seating, metal seating, a cryogenic extended bonnet, and special high-pressure constructions.
For high-pressure oil and gas or severe chemical duties, top entry ball valves can also be fitted with cavity relief, antistatic design, fire-safe construction, and low-emission sealing.
Shandong Yuhong Valve Co., Ltd. provides applicable top entry bodies, sealing, and automation configurations to the line pressure, media, and maintenance requirements.
Core Structural Advantages
1. Service Internal Parts from the Top of the Body
A top entry body lets some plug, seat, and sealing components be removed from above.
On permanently installed industrial lines, that can cut some of the pipe flange dismantling needed for maintenance.
It does not mean maintenance under pressure. The valve must go through isolation, depressurisation, draining, and media confirmation per the safety procedure before the cover is opened.
2. One-Piece Body Reduces Some Connection Interfaces
Top entry bodies are usually designed as a single piece or with few pressure-containing split connections.
Compared with some multi-piece side entry bodies, that can reduce some body connection interfaces, though the top cover remains a pressure-containing joint that must seal reliably.


3. Suited to Large-Bore Trunnion Constructions
A top entry trunnion mounted ball valve carries the main fluid load through top and bottom supports and seals through movable seats.
At higher pressures and larger bores, different seat constructions such as SPE and DPE can be configured to the engineering requirements.
4. Extendable to Severe Service
As required, the valve can be fitted with a cryogenic extended bonnet, high-temperature metal seating, a wear-resistant ball, fire-safe construction, and low-emission packing.
For critical process valves, seat sealant injection and cavity relief can also be added.
Technical Specifications
|
Parameter |
Available Configuration |
|
Product Construction |
Removable top cover, 90° rotary ball valve |
|
Nominal Size |
DN50–DN1200 (NPS 2–48); special constructions extendable to DN1400 |
|
Nominal Pressure |
PN16, 25, 40, 63, 100, 160, 250, 320, 400, 420 |
|
ASME Pressure Class |
Class 150, 300, 600, 900, 1500, 2500 |
|
Operating Temperature |
Standard -29°C to +200°C; dedicated low-temperature and high-temperature configurations designed separately |
|
Body Construction |
One-piece body, top entry pressure-containing cover |
|
Body Material |
WCB, WCC, LCB, LCC, CF8, CF8M, CF3M |
|
Forged Materials |
A105, A350 LF2, A182 F304, F316, F316L |
|
Special Alloys |
2205, 2507, Monel, Inconel, Hastelloy |
|
Ball Construction |
Mainly trunnion mounted; other constructions per size |
|
Ball Material |
A105+ENP, 304, 316, 316L, and applicable alloys |
|
Stem Material |
316, 410, 17-4PH, etc. |
|
Seat Construction |
Removable seat, spring-preloaded seat |
|
Seat Pressure Type |
SPE, DPE, per project requirements |
|
Soft Seat Materials |
PTFE, RPTFE, Nylon, Devlon, PEEK |
|
Metal Seating |
STL, WC, CrC, and applicable wear-resistant materials |
|
Bore Type |
Full Bore, Reduced Bore |
|
Cavity Function |
DBB, optional DIB, cavity bleed |
|
Emergency Sealing |
Optional seat and stem sealant injection |
|
Cover Sealing |
Metal gasket, spiral wound gasket, and applicable high-performance seals |
|
Stem Packing |
PTFE, flexible graphite, low-emission packing |
|
Antistatic |
Optional |
|
Fire-Safe Design |
Designable and verifiable to applicable API 607, API 6FA, and ISO 10497 requirements |
|
Low-Emission Design |
Configurable to applicable ISO 15848-1 and API 641 requirements |
|
Special Temperature Configuration |
Cryogenic extended bonnet, dedicated high-temperature bonnet |
|
End Connection |
RF, RTJ, BW, Hub, etc. |
|
Connection Standard |
ASME B16.5, B16.47, B16.25 |
|
Face-to-Face Dimension |
API 6D, ASME B16.10, and applicable standards |
|
Operation |
Worm gear, pneumatic, electric, hydraulic |
|
Actuator |
Quarter-turn pneumatic, electric, hydraulic, and heavy-duty automation solutions |
|
Automation Accessories |
Solenoid valve, limit switch, position transmitter, ESD control accessories |
|
Design Standards |
API 6D, ASME B16.34, and applicable product specifications |
|
Testing Standards |
API 6D, API 598, and project-specific test requirements |
Note: the maintenance advantage of a top entry construction assumes the specific assembly method and site space allow it. The valve must be fully isolated and internally depressurised before inspection.
Typical Applications
Gas Transmission and Stations:
Critical valve positions that need long-term reliable isolation where pipe dismantling is difficult.
Petrochemical:
High-pressure process lines, equipment inlets, and special media shut-off.
Refining and High-Temperature Units:
High-temperature metal seats and special packing for applicable constructions.
LNG and Cryogenic Lines:
Cryogenic materials and extended bonnet constructions for the relevant low-temperature control requirements.
Key Questions When Selecting a Top Entry Ball Valve
When choosing a top entry construction, give priority to the site maintenance space and the height needed to lift the top cover.
For projects that replace seats periodically, confirm the seat removal path, special tooling, cover weight, and lifting conditions - otherwise the valve may have a top entry design that site space prevents you from actually servicing.
For high-pressure trunnion constructions, the cavity pressure relief method and the seat sealing direction also have to be defined.
Yuhong Manufacturing and Quality Control
The critical machining items of a top entry ball valve are the one-piece body cavity, the top pressure-containing sealing face, the ball support positions, and the removable seat mounting dimensions.
The fit between cover and body has to be controlled so the valve can be reassembled reliably after being opened.
During assembly and inspection, seat preload, ball rotation, cover sealing, and complete unit torque are checked, with pressure and shut-off sealing tests completed per the order requirements.
FAQ
Q1: Can a top entry ball valve be serviced online under pressure?
No. "Online maintenance" for a top entry valve usually means the valve need not be removed from the pipeline, but reliable isolation, depressurisation, and safety confirmation are required before inspection.
Q2: What is the main difference between top entry and side entry ball valves?
The main difference is the assembly and service direction of the trim. A top entry valve is accessed through the top cover; a side entry valve is normally assembled or dismantled from the body side or ends.
Q3: Do all top entry ball valves use a trunnion mounted ball?
Large and high-pressure top entry products usually use a trunnion mounted construction, but the specific design still has to be confirmed against size, pressure, and project requirements.
Q4: Is a top entry ball valve suitable for pipelines that cannot be dismantled for a long time?
It is worth evaluating, but top maintenance space and the necessary lifting conditions must still be reserved, along with the valve isolation and draining requirements.

Request a Top Entry Ball Valve Quotation
Please provide the valve size, media, pressure, temperature, end connection, allowable maintenance space, and sealing requirements. Yuhong can offer the top entry body, seat construction, and automation scheme.
Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com
Hot Tags: top entry ball valve, China top entry ball valve manufacturers, suppliers, factory, cast angle globe valve, corrosive fluid globe valve, gear operated globe valve, high cycle globe valve, hygienic globe valve, threaded globe valve





