Ventilation Butterfly Valve

The Yuhong ventilation butterfly valve uses a large-bore, low-resistance disc structure for flow control and isolation in air, flue gas and industrial ventilation ducts. Low pressure large size, heat-resistant and wear-resistant options are available, with pneumatic or electric actuators, for metallurgy, power, dust removal and industrial furnace systems.
Send Inquiry
Description

Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of ventilation butterfly valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade ventilation butterfly valve from our factory.

 

Product Introduction

 

The Yuhong ventilation butterfly valve uses a large-bore, low-resistance disc structure for flow control and isolation in air, flue gas and industrial ventilation ducts. Low pressure large size, heat-resistant and wear-resistant options are available, with pneumatic or electric actuators, for metallurgy, power, dust removal and industrial furnace systems.

 

Product Overview

 

A ventilation butterfly valve is a rotary control valve mainly used on air, flue gas and other industrial gas ducts. It is widely used in industrial ventilation, dust removal, furnace flues, waste heat recovery and some low pressure gas transport systems.

Compared with a standard pressure-tight shutoff butterfly valve, a ventilation valve usually focuses more on large bore, low flow resistance, flow control and structural economy.

Some large ventilation ducts reach DN2000 and above while the working pressure stays relatively low. Using pressure-tight valves of a high pressure class throughout would add weight, drive torque and purchase cost.

A ventilation butterfly valve can use a single disc, a multi-disc arrangement or a suitable dedicated flow passage, with low-leakage structures and different temperature-resistant materials as needed.

Its main functions are regulating air or flue gas flow, balancing duct resistance, changing air volume and providing process isolation.

A standard ventilation butterfly valve should not be assumed to have the same closing leakage capability as a high performance sealed butterfly valve. Systems needing gas-tight shutoff, toxic gas isolation or higher pressure should be given a separate sealing and pressure-retaining structure.

Shandong Yuhong Valve Co., Ltd. can supply the matching ventilation butterfly valve and actuator from duct size, medium temperature, differential pressure and air volume control requirement.

 

Core Technical Advantages of the Ventilation Butterfly Valve

 

1. Large bore, low flow resistance

For high air volume industrial systems, a ventilation butterfly valve can use a relatively simple disc and body bore to reduce obstruction of the gas flow.

Actual pressure loss depends on disc opening, velocity, duct shape and valve structure, and should be checked against the system resistance calculation.

2. Suited to air volume control

Rotating the disc changes the effective flow area, which serves air volume, flue gas volume and ventilation system flow control.

For duties needing precise control, provide the valve opening versus flow characteristic and define the effective control range properly.

10228218424f694c9ef8f34b84ac80df1dcda4c37a
1022821079f63ac4435d6345cf84aeecccd8db8f08

 

3. Selectable sealing classes

A standard ventilation butterfly valve can use a structure that allows a certain leakage, lowering manufacturing and operating cost in some duties.

For systems needing lower leakage, additional sealing rings, seal air or other dedicated isolation measures can be evaluated.

4. Material selected by flue gas temperature

Carbon steel or stainless steel suits ambient temperature air.

High temperature flue gas needs suitable heat-resistant alloys, an insulated stem and high temperature bearings, so temperature changes do not seize the disc or damage the actuator.

Technical Specifications

 

Item

Parameter and available options

Product type

Industrial ventilation, flue gas control and isolation butterfly valve

Nominal size

DN100–DN4000 (NPS 4–160); custom sizes for special rectangular ducts

Nominal pressure

Commonly PN1, PN2.5, PN6; PN10 can be evaluated for special pressure-retaining structures

Working differential pressure

Designed from the actual conditions of large ducts, fans and flue gas systems

Working temperature

Normally -20℃ to +200℃; dedicated high temperature structures cover about +400℃ to +800℃ where applicable

Body structure

Circular duct, rectangular duct, single disc or dedicated multi-disc

Body material

Q235B, Q345B, WCB, 304, 316, 316L

High temperature material

310S, 253MA, Inconel 601 and suitable heat-resistant alloys

Disc structure

Single-layer disc, ribbed disc, double-layer insulated disc

Disc material

Carbon steel, stainless steel, heat-resistant alloy

Stem material

304, 316, 410 and suitable high temperature shaft materials

Bearing type

Composite bearing, heat-resistant alloy bearing and suitable high temperature supports

Sealing type

Metal clearance seal, metal sealing ring, dedicated low-leakage structure

Closing leakage

Set by the leakage rate, test differential pressure and medium specified by the project

Flow characteristic

Quarter-turn air volume control characteristic, per disc design

Rotation angle

90°; special structures per design

Suitable media

Air, flue gas, suitable dust-laden gases and industrial ventilation media

Flow passage shape

Circular, rectangular and custom duct shapes

Connection type

Flange, weld end, dedicated duct interface

Flange standard

GB/T 9113, EN 1092-1 and project standard

Stem heat isolation

Extended shaft, isolation bracket, heat dissipation structure

Operation

Manual, gear operator, electric, pneumatic

Control mode

On/off control, 4–20 mA continuous control, remote feedback

Electric power supply

AC 220V, 380V and similar

Protection class

IP65, IP66, IP67 and similar, depending on the actuator

Optional accessories

Position feedback, limit switch, smart positioner, isolation bracket

Design standard

JB/T 8692 and applicable duct valve technical requirements

Inspection items

Dimensions, opening and closing, necessary pressure and leakage performance checks

Note: a ventilation butterfly valve is generally low pressure, high flow duct equipment. A PN6 low pressure duct valve cannot be used directly on a standard Class 150 pressure line.

 

Typical Applications

Metallurgy and steel:

Hot air, flue gas and process ventilation ducts.

Power and waste heat systems:

Flue gas flow control, waste heat recovery and auxiliary ducts.

Industrial dust removal:

Air volume control in dust removal ducts and dust-laden gas systems.

Industrial furnaces and kilns:

Combustion air and flue gas control with heat-resistant materials selected by temperature.

 

What Needs Attention When Selecting a Ventilation Butterfly Valve?

 

Air volume and system resistance

Provide the normal and maximum air volume, fan pressure, gas temperature and duct size, so the disc structure does not create excessive resistance.

Allowable leakage rate

Some ventilation systems accept a small gas leakage after closing, while toxic or hazardous gas systems may need stricter isolation.

Define the leakage amount, test differential pressure and medium. Writing "good sealing required" alone is not enough.

Temperature and thermal expansion

For high temperature ducts, check disc thermal deformation, stem support and actuator isolation. Large valves also need hot and cold clearance checks.

 

Yuhong Manufacturing and Quality Control

 

The key manufacturing points for a ventilation butterfly valve are the large-diameter body shape, disc stiffness, stem support and flow passage dimensional control.
Yuhong can machine circular or special body structures from duct drawings, with properly arranged stiffeners and bearing supports.
For electric and pneumatic units, check the position travel, control feedback, and the necessary opening and leakage performance.

 

FAQ

 

Q1: What is the difference between a ventilation butterfly valve and a standard butterfly valve?

A ventilation butterfly valve usually focuses on large bore, low pressure loss and air volume control. Its closing leakage requirement may differ from that of a standard industrial shutoff butterfly valve.

Q2: Can a ventilation butterfly valve be used for high temperature flue gas?

Dedicated heat-resistant materials and isolation structures can be used, but the valve must be designed from the actual temperature, pressure and flue gas composition.

Q3: Can a ventilation butterfly valve achieve zero leakage?

A standard clearance-sealed ventilation butterfly valve normally cannot guarantee zero leakage. Where strict shutoff is required, a separate sealing and verification plan should be designed.

Q4: Can a rectangular duct be fitted with a butterfly valve?

A matching rotary damper or multi-disc structure can be designed for the duct shape. The specific dimensions and actuator should be set from the actual duct conditions.

 

modular-1

Request a Ventilation Butterfly Valve Quotation

Please provide the duct size, air or flue gas flow rate, temperature, working pressure, allowable leakage rate and control mode.
Yuhong can supply the matching large-bore body, heat-resistant disc and automated drive configuration.
Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com

Hot Tags: ventilation butterfly valve, China ventilation butterfly valve manufacturers, suppliers, factory, bellows seal forged globe valve, bolted bonnet globe valve, duplex stainless steel globe valve, erosion resistant trim globe valve, main steam globe valve, Single Seat Control Valve

Send Inquiry