Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of triple offset metal seated butterfly valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade triple offset metal seated butterfly valve from our factory.
Product Introduction
The Yuhong triple offset metal seated butterfly valve uses an offset cone sealing design that cuts seal friction during disc travel. Metal laminate and solid metal sealing rings, plus bi-directional options, suit steam, oil and gas, chemical and higher pressure-temperature duties.
Product Overview
A triple offset metal seated butterfly valve is a high performance rotary shutoff valve built on three offset geometry parameters and a conical sealing structure. It is mainly used on industrial lines that demand higher temperature, pressure and reliable metal sealing.
The first and second offsets optimize the relative position between the stem and the disc sealing face, and between the stem and the body bore. The third offset changes the geometry of the sealing cone, so the sealing faces stay separated through most of the stroke and only touch at final closure.
This structure helps cut the wear that conventional metal-seated butterfly valves suffer from long-travel rubbing, and uses closing torque to build the required sealing contact force.
The sealing ring can be a laminate of metal and flexible graphite, or a solid metal sealing structure.
The laminate uses the elasticity of the composite layer to improve sealing contact. The solid metal version uses a full metal-to-metal seal for extreme temperature, abrasion and certain special media.
A triple offset design does not automatically mean bi-directional sealing at full differential pressure. Where tight shutoff is required in both directions, the sealing ring, seat and stem load path must be optimized, and forward and reverse sealing verified separately.
Shandong Yuhong Valve Co., Ltd. can configure the triple offset structure and automated actuator from the medium, pressure and temperature, sealing direction and leakage class.
Core Technical Advantages
1. Triple offset geometry reduces seal friction
During opening, the triple offset sealing pair leaves the contact zone quickly and avoids continuous friction over most of the stroke.
This lowers the risk of wear and sticking, especially on industrial lines that switch frequently or run hot.
2. Metal laminate or solid metal sealing
A metal laminate ring can combine stainless steel with flexible graphite and similar materials, giving the ring a degree of compensation.
A solid metal ring suits duties where the soft composite layer must not take part in sealing.
The choice depends on working temperature, abrasion, corrosivity and closing differential pressure, not on material hardness alone.


3. Bi-directional high performance sealing
By optimizing the sealing cone angle, ring flexibility, seat support and disc loading, a triple offset valve can be designed for bi-directional closure.
Bi-directional capability must be based on the maximum allowable closing differential pressure in both directions and the corresponding leakage test, not on the product name.
4. High temperature and fire-safe duty
Metal sealing covers temperature ranges that standard rubber seats cannot handle.
For fire-safe projects, the applicable fire test must also be carried out on the specific valve structure.
Technical Specifications
|
Item |
Parameter and available options |
|
Structure |
Triple offset conical seal, quarter-turn butterfly valve |
|
Nominal size |
DN80–DN2400 (NPS 3–96); special large sizes on request |
|
Nominal pressure |
PN10, 16, 25, 40, 63, 100, 160, depending on structure |
|
ASME pressure class |
Class 150, 300, 600, 900; Class 1500 can be evaluated for special structures |
|
Working temperature |
Commonly -29℃ to +450℃; special cryogenic down to -196℃, high temperature structures up to +600℃ and above |
|
Body material |
WCB, WCC, LCB, LCC, CF8, CF8M, CF3M, WC6, WC9 |
|
Special material |
Duplex 2205, 2507, Monel, Inconel, Hastelloy |
|
Disc material |
WCB, CF8, CF8M, CF3M, duplex steel and suitable alloys |
|
Stem material |
410, 316, 17-4PH, XM-19 and suitable high-strength alloys |
|
Sealing ring structure |
Stainless steel plus graphite laminate ring, solid metal sealing ring |
|
Laminate sealing material |
304/316 plus flexible graphite, duplex steel plus graphite, etc. |
|
Metal sealing face |
316, 410, Stellite, suitable hard alloys |
|
Surface hardening |
STL overlay, surface hardening, suitable wear-resistant coatings |
|
Seat structure |
Fixed or removable metal seat |
|
Sealing direction |
Uni-directional or bi-directional, verified by design class and differential pressure |
|
Leakage class |
API 598, ISO 5208 Rate A and similar; tight shutoff available |
|
Stem packing |
Flexible graphite, low-emission packing |
|
Fire-safe design |
Designed and verified to API 607, ISO 10497 and similar |
|
Low-emission design |
Configured to ISO 15848-1 and applicable project requirements |
|
Rated rotation |
90° |
|
Flow characteristic |
Inherent characteristic of the disc structure |
|
Connection type |
Wafer, Lug, Double Flanged, Butt Weld |
|
Flange standard |
ASME B16.5, B16.47, EN 1092-1 |
|
Weld end standard |
ASME B16.25 |
|
Face-to-face |
API 609 Category B, EN 558 |
|
Operation |
Gear operator, pneumatic, electric, hydraulic |
|
Optional accessories |
Smart positioner, solenoid valve, limit switch, position feedback, manual override |
|
Design standard |
API 609, ASME B16.34, EN 593 |
|
Test standard |
API 598, ISO 5208, EN 12266-1 |
Note: some special high temperature and cryogenic figures are achieved by specific combinations of sealing ring, body material and stem packing. Whether the ring is a laminate or solid metal must be stated for the actual duty.
Typical Applications
Power and steam systems:
Steam and related high temperature utility shutoff within the pressure-temperature limits.
Petrochemical:
Isolation of process oils, gases and some high temperature media.
Natural gas and oil and gas facilities:
Transport and equipment shutoff at the corresponding design class.
Industrial high temperature and storage systems:
Piping that needs metal sealing and low opening friction.
How Should the Sealing Structure of a Triple Offset Butterfly Valve Be Selected?
Laminate seal or solid metal seal?
A metal laminate seal suits duties that need some elastic compensation and where the medium and temperature allow composite materials.
Where the graphite laminate must not contact the medium directly, or where temperature and abrasion are high, a solid metal sealing ring can be selected.
Is bi-directional sealing required?
Where pressure can act in both directions, define the maximum closing differential pressure and leakage requirement for each direction.
If tight shutoff at full rated differential pressure is required both ways, write this into the technical agreement and verify each direction separately.
Will it be used for continuous throttling?
A triple offset butterfly valve can serve suitable control duties, but the Cv characteristic, dynamic disc torque, and vibration, noise and erosion at partial opening must be checked.
Yuhong Manufacturing and Quality Control
The manufacturing challenges of a triple offset butterfly valve lie in the offset geometry, the sealing cone, the relative position of disc and seat, and stem support accuracy.
Yuhong can machine the sealing surfaces and offset structures from approved drawings, and control closing torque, sealing contact condition and the opening and closing path after assembly.
For bi-directional products, forward and reverse closing leakage are tested separately. For solid metal sealing rings, the seal pair materials, surface quality and thermal expansion fit also need tight control.
FAQ
Q1: Is a triple offset metal seated butterfly valve always metal-to-metal?
Not necessarily. Triple offset describes the sealing geometry. It can use a metal and graphite laminate ring or a solid metal sealing ring.
Q2: Can a triple offset butterfly valve achieve bi-directional zero leakage?
With a suitable bi-directional sealing structure and testing at the corresponding forward and reverse differential pressures, the agreed tight shutoff requirement can be met.
Q3: Is a triple offset butterfly valve suitable for high temperature steam?
Materials and sealing structures can be selected by temperature and pressure, but the body, stem, sealing ring and packing must all meet the requirement.
Q4: Which is more wear resistant, a laminate metal sealing ring or a solid metal ring?
It depends on the medium and the structure. Solid metal has advantages in some abrasive or high temperature duties, but sealing compensation, thermal expansion and operating torque must also be considered.

Request a Triple Offset Metal Seated Butterfly Valve Quotation
Please provide the size, pressure class, medium, temperature, sealing direction, closing leakage requirement and sealing ring material requirement.
Yuhong can configure laminate or solid metal sealing, bi-directional structure and automated actuators for the duty.
Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com
Hot Tags: triple offset metal seated butterfly valve, China triple offset metal seated butterfly valve manufacturers, suppliers, factory, abrasive slurry globe valve, ASME Class 2500 globe valve, bronze globe valve, BS 1873 globe valve, chilled water globe valve, globe valve





