Concentric Resilient Seated Butterfly Valve

The single-seat control valve is a core throttling and isolation element in modern industrial process automation systems. This product features a classic top-guided, single-plug architecture integrated into an S-streamline internal valve body cavity. This geometric design naturally delivers low flow resistance, low pressure drop, high flow capacities, and a wide rangeability of up to 50:1.
Send Inquiry
Description

Shandong Yuhong Valve Co., Ltd. is one of the most reliable manufacturers and suppliers of concentric resilient seated butterfly valve in China. We have world-leading production equipment and strong manufacturing capabilities. Welcome to wholesale bulk high-grade concentric resilient seated butterfly valve from our factory.

 

Product Introduction

 

The Yuhong concentric resilient seated butterfly valve uses a stem and disc on the same centerline, with EPDM, NBR or similar resilient seats for reliable bi-directional shutoff. Wafer, lug and flanged bodies with pneumatic or electric drives suit water supply, cooling water and plant utilities.

 

Product Overview

 

A concentric resilient seated butterfly valve is a quarter-turn valve whose stem axis passes through both the disc center and the seat sealing center. Closing relies on contact compression between the disc edge and the resilient seat.

Compared with metal-seated butterfly valves, the concentric resilient design better suits liquid and gas lines at ambient or moderate temperature, moderate pressure and tighter closing leakage requirements.

As the actuator turns the disc, the disc opens from the closed position and changes the flow area. These valves are compact and light, need little installation space, and fit large-bore industrial water systems.

The seat can be EPDM, NBR, FKM or another elastomer, chosen from the medium. For water treatment, general industrial water and some chemicals, temperature resistance, oil resistance and chemical resistance must be assessed separately.

Shandong Yuhong Valve Co., Ltd. can supply concentric resilient seated butterfly valves in various sizes and actuator configurations, based on line pressure, medium, connection standard and automation requirements.

 

Core Technical Advantages

 

1. Resilient seat delivers bi-directional sealing
Proper compression between the disc edge and the resilient seat gives bi-directional shutoff within the design differential pressure.
For bubble-tight duties, a suitable seat design can be specified and tested to EN 12266-1 or ISO 5208.


2. EPDM, NBR and other seat options
EPDM is common in suitable water and some chemical duties. NBR suits some oils and industrial fluids. FKM fits certain chemical or temperature conditions.
The material must follow the medium, temperature and service life, not the working pressure alone.

1022314872c2a5cbe18def40bbb861b50ed8343d99
10223151178a5ab075d36f4f8d80468483be334dce

 

3. Compact design for large lines
Concentric butterfly valves can be supplied in wafer, lug or double-flanged bodies.
For space-limited piping and automated valve trains, the short face-to-face length and low installation weight are clear advantages.


4. Automation-ready
The valve can be fitted with pneumatic or electric actuators for remote switching, equipment interlocking and position feedback.
For larger sizes, calculate the flow-induced torque and the seat breakaway torque, then match the actuator and bracket.

Technical Specifications

 

Item

Parameter and available options

Structure

Concentric type, centerline disc, resilient seat

Nominal size

DN40–DN2000 (NPS 1½–80); special large sizes on request

Nominal pressure

PN6, 10, 16, 25

ASME connection

Mating to ASME Class 125/150 flanges; actual rated working pressure depends on the valve model

Working temperature

Normally -20℃ to +120℃; special rubber compounds up to about +150℃ or higher where applicable

Body material

HT250, QT450, WCB, CF8, CF8M, CF3M

Special body material

Duplex stainless steel, aluminum bronze and suitable corrosion-resistant alloys

Disc material

Ductile iron, 304, 316, 316L, duplex steel, aluminum bronze

Disc protection

Nylon coating, epoxy coating, suitable anti-corrosion surface treatment

Stem material

410, 420, 304, 316, 17-4PH, 2205

Seat material

EPDM, NBR, FKM, silicone rubber, polyurethane and similar

Seat structure

Replaceable resilient seat, suitable fully bonded seat

Sealing direction

Bi-directional, verified at the design differential pressure

Leakage class

EN 12266-1 Rate A, ISO 5208 Rate A and similar

Suitable media

Water, industrial wastewater, air, suitable chemical liquids and other compatible media

Flow characteristic

Inherent butterfly valve flow characteristic as applicable

Rated rotation

90°

Connection type

Wafer, Lug, Double Flanged

Flange standard

EN 1092-1, ASME B16.5, ASME B16.47, GB/T 9113

Face-to-face

EN 558, ISO 5752, API 609 applicable series

Mounting interface

ISO 5211

Operation

Lever, gear operator, pneumatic, electric

Actuator

Single-acting and double-acting pneumatic; electric quarter-turn

Control and feedback

On/off signal, limit switch feedback, position transmitter

Protection and explosion protection

IP65, IP66, IP67; explosion-proof electrical accessories optional per project

Optional accessories

Solenoid valve, limit switch, filter regulator, manual override

Main standards

API 609 Category A, EN 593, MSS SP-67

Test standards

API 598, EN 12266-1, ISO 5208

Note: compatibility with Class 150 flanges does not mean every concentric resilient seated butterfly valve carries the full Class 150 pressure-temperature rating.

 

Typical Applications

Industrial water supply and drainage:

On/off isolation on industrial water transport, pump stations and water treatment lines.

Circulating cooling water:

Power, chemical and other industrial cooling water systems.

HVAC and utilities:

Chilled and hot water or air lines within the medium temperature and pressure limits.

General industrial liquids:

Some non-highly-abrasive industrial media, with the right seat material.

 

Engineering Selection and Purchasing Points

 

Start selection by confirming compatibility between the medium and the rubber. The seat material temperature limit is not the maximum working temperature of the whole valve.

For lug bodies, clarify whether the valve will be used at a line end with one side dismantled. End-of-line pressure capability may be lower than the normal double-flanged installation, and must be confirmed for the specific structure.

Before installation, also check the pipe bore, the flange sealing face and the disc rotation space, so the disc does not interfere with adjacent piping when opening.

 

Yuhong Manufacturing and Quality Control

 

In concentric resilient seated butterfly valve production, Yuhong focuses on the body bore, the disc edge, stem concentricity and the fitted dimensions of the resilient seat.

Rubber seats are inspected for appearance, dimensions, hardness and material quality. After assembly, disc travel smoothness, bi-directional sealing and the necessary torque values are checked.

Pneumatic and electric units also get actuator limit adjustment and open/close position feedback checks.

 

FAQ

 

Q1: Can a concentric resilient seated butterfly valve seal in both directions?

Bi-directional sealing can be achieved with a suitable resilient seat design, but the corresponding differential pressure and test conditions must be confirmed.

Q2: How do I choose between EPDM and NBR seats?

EPDM is common in suitable water systems, while NBR suits some oil-based media. The actual choice follows chemical compatibility and temperature.

Q3: Can a lug-type butterfly valve be used at the end of a line?

Some lug structures can, but the end-of-line allowable differential pressure, bolting and pipe removal conditions must be verified.

Q4: Is a concentric butterfly valve suitable for long periods at small opening?

It can serve some throttling duties. Where the valve runs at small opening for long periods or at high differential pressure, check disc hydraulic torque, vibration, seat wear and control stability.

 

modular-1

Request a Concentric Resilient Seated Butterfly Valve Quotation

Please provide the medium, line size, pressure, temperature, seat material, connection type and manual or automatic control requirement.
Shandong Yuhong Valve Co., Ltd. can supply the matching body, disc and actuator configuration.
Shandong Yuhong Valve Co., Ltd. Email: info@yuhong-valve.com

 

Hot Tags: concentric resilient seated butterfly valve, China concentric resilient seated butterfly valve manufacturers, suppliers, factory, fuel oil globe valve, heavy duty globe valve, high pressure steam globe valve, Low Noise Cage Guided Control Valve, Nitrogen Venting Valve, Self operated Pressure Control Valve

Send Inquiry